This is an update for my CarPC project.
The main features are:
Hardware:
[Operating System]
- Raspbian Wheezy 9.February.2013
- Custom kernel 3.6.11
- eGalax touch screen module
- si470x usb radio module
- snd-usb-audio module
[Media Center]
- omxplayer
- XBMC 12.2 Frodo
- sources with objects build on 27.July.2013
- skin: CarPC-touch
- system shutdown button
- system restart button
- reload skin button
- switch to camera view button
- modified spectrum analyzer(OpenGL with no rotation)
- eGalax touch screen calibrated
- eGalax touch screen click&drag fix
- black rectangle behind XBMC removed
- patch to add getMousePosition feature to xbmcgui module(used to redirect clicks from the Navigation skin page to X11 using xdotool)
[Navigation]
- Navit build from source
- Zoom In, Zoom Out buttons
- Click sent from XBMC to X11 (Navit Window)
Car Modding
I had to relocate my original Radio/CD player in the trunk and keep it set on aux input source. This included buying about 60m of wires and also harness:
1. Metra 71-9003 Bmw Mini Factory Radio OEM Wire Harness
2.Scosche VW03B 2002+ Vw Audi BMW Radio Stereo Harness
- The wires are 2mm in diameter with good insulation, resistant at temperature variations
- I have added fuses(1.5A for the radio, 1A for Raspberry PI, 1A for display, 0.1A for reverse camera trigger, 0.1A for reverse camera video signal)
Bugs:
- sound pops(will soon disappear by using this hdmi to hdmi and audio splitter)
- Navigation is behind Video Player -> Navigation isn't visible while playing videos
The main features are:
Hardware:
- Raspberry PI model B(256MB ram): ~35$
- 7 inch display with touchscreen for car rear view camera, from eBay(touchscreen is connected to one USB port): 80$
- HDMI male to HDMI male cable(golden plated):20$
- 8GB SDHC class 6 card: 20$
- 12V(500mA) AC to DC adapter for powering the display
- 5V(1A) microUSB AC to DC converter for powering the PI
- ST22 SkyTraq GPS Receiver Module: 25$
- Reverse Camera: 15$
[Operating System]
- Raspbian Wheezy 9.February.2013
- Custom kernel 3.6.11
- eGalax touch screen module
- si470x usb radio module
- snd-usb-audio module
[Media Center]
- omxplayer
- XBMC 12.2 Frodo
- sources with objects build on 27.July.2013
- skin: CarPC-touch
- system shutdown button
- system restart button
- reload skin button
- switch to camera view button
- modified spectrum analyzer(OpenGL with no rotation)
- eGalax touch screen calibrated
- eGalax touch screen click&drag fix
- black rectangle behind XBMC removed
- patch to add getMousePosition feature to xbmcgui module(used to redirect clicks from the Navigation skin page to X11 using xdotool)
[Navigation]
- Navit build from source
- Zoom In, Zoom Out buttons
- Click sent from XBMC to X11 (Navit Window)
Car Modding
I had to relocate my original Radio/CD player in the trunk and keep it set on aux input source. This included buying about 60m of wires and also harness:
1. Metra 71-9003 Bmw Mini Factory Radio OEM Wire Harness
2.Scosche VW03B 2002+ Vw Audi BMW Radio Stereo Harness
front without OEM Radio/CD player
trunk with relocated OEM Radio/CD player
Mounted Raspberry PIin the armrest
Safety:- The wires are 2mm in diameter with good insulation, resistant at temperature variations
- I have added fuses(1.5A for the radio, 1A for Raspberry PI, 1A for display, 0.1A for reverse camera trigger, 0.1A for reverse camera video signal)
Bugs:
- sound pops(will soon disappear by using this hdmi to hdmi and audio splitter)
- Navigation is behind Video Player -> Navigation isn't visible while playing videos